- Pack
Including €0.80 for ecotax
Reference: INKALaguilasL
Our Inka Relax support is specially designed to provide all the comfort of Latin American hammocks without wooden bars. They need to be curved to be comfortable diagonally. The double bolting of the tubes prevents them from banging against each other. The hammock is made in Colombia by a high-end manufacturer with whom we have been working since 1993! Machine washable up to 60° if necessary. This set is incredibly durable as it withstood our test with 478 kg! See the photo. Caribe Aguilas hammock size L with a width of 140. Creation and exclusive to Tropical Influences. Hammocks since 1988, a long history....
Our Inka Relax support is specially designed to provide all the comfort of Latin American hammocks without wooden bars. They need to be curved to be comfortable diagonally. The double bolting of the tubes prevents them from banging against each other. The hammock is made in Colombia by a high-end manufacturer with whom we have been working since 1993! Machine washable up to 60° if necessary. This set is incredibly durable as it withstood our test with 478 kg! See the photo. Caribe Aguilas hammock size L with a width of 140. Creation and exclusive to Tropical Influences. Hammocks since 1988, a long history....
It is important to wash your hammock in the machine at least once a year. Our advice: tie the arms together to prevent them from tangling and wash it in the machine at least once at the end of the season without using a dryer. Store it in a dry place with your household linen. This will prevent mold on the cotton and nibbling by small rodents.
The Inka Relax hammock stand is a metal model that supports a lot of weight (230 kg as it passed our tests with 478 kg. We halve our maximum weights after testing). A classic that we have been selling for many years. Its height/length ratio is important for the final comfort in the hammock.
Regarding maintenance, this stand is not made of stainless steel and is therefore not guaranteed against rust. We advise you to get a 0.5L pot of Hammerite paint "Slate Grey Hammered" from your next visit to a large DIY store. Rust spots will begin to appear where the tubes are in contact, where there are bolts, as the paint wears off in these areas. At first, you will apply small touch-ups on these oxidation spots. After a few years, the tubes become a bit dull with outdoor use. It will then be time to apply a full coat of paint.
Hammerite paint is incredibly resistant on metal (thanks to the blacksmith from Tarnos at La Yayi for his advice). Only one coat is needed and it can be applied directly over rust. Note, if you keep the pot upside down, the layer that dries due to air exposure will end up at the bottom of the pot. When you open it, even after 10 years, the liquid paint will be on the surface.
Data sheet