- -10%
- Pack
Including €0.80 for ecotax (not impacted by the discount)
Reference: INKALpoligonorougeL
Our Inka Relax stand is specially designed to provide all the comfort of Latin American hammocks without wooden bars. They need to be curved to be comfortable diagonally. The double bolting of the tubes prevents them from banging against each other. The hammock is made in Colombia by a high-end manufacturer with whom we have been working since 1993! Machine washable up to 60° if necessary. This set is very durable as it withstood our test with 478 kg! See the photo. Caribe Poligono red hammock size L with a width of 140. A traditional Colombian jacquard weave.
Our Inka Relax stand is specially designed to provide all the comfort of Latin American hammocks without wooden bars. They need to be curved to be comfortable diagonally. The double bolting of the tubes prevents them from banging against each other. The hammock is made in Colombia by a high-end manufacturer with whom we have been working since 1993! Machine washable up to 60° if necessary. This set is very durable as it withstood our test with 478 kg! See the photo. Caribe Poligono red hammock size L with a width of 140. A traditional Colombian jacquard weave.
For those who want to enjoy their hammock without any constraints. A quality hammock, woven in Latin America, suitable for a person up to 1.70 m tall. The stand is easily portable as it weighs only 16 kg. An excellent value for this set that you can quickly install on your terrace. Sit down, then lie back comfortably: it's time to relax or sip your favorite drink accompanied by the crescent moon cushion that we specially make.
It is important to wash your hammock in the machine at least once a year. Our advice: tie the arms together to prevent them from tangling and wash it in the machine at least once at the end of the season without using the dryer. Store it in a dry place with your household linen. This will prevent mold on the cotton and nibbling by small rodents. How to wash my hammock?
The Inka Relax hammock stand is a metal model that supports a lot of weight (230 Kg as it passed our tests with 478 kg. We halve our maximum weights after testing). A classic that we have been selling for many years. Its height/length ratio is important for the final comfort in the hammock.
Regarding maintenance, this stand is not stainless steel and is therefore not guaranteed against rust.We recommend that on your next visit to a large DIY store, you get a 0.5L pot of Hammerite paint "Hammered Slate Grey". Rust spots will begin to appear where the tubes are in contact, where there are bolts because the paint wears off in these places. Initially, you will apply small touch-ups on these oxidation spots. After a few years, the tubes become a bit dull with outdoor use. It will then be time to apply a full coat of paint. Hammerite paint is incredibly resistant on metal (thanks to the blacksmith from Tarnos at La Yayi for his advice). Only one coat is needed and it can be used directly on rust.
Note, if you store the pot upside down, the layer that dries due to air will end up at the bottom of the pot. When you open it, even after 10 years, the liquid paint will be on the surface.
For people taller than 1.70 m, we recommend the XL version of this set: Hammock with Inka XL stand - Poligono Red
Data sheet