- Pack
Including €0.80 for ecotax
Reference: INKALcrépusculeL
Our Inka Relax support is specially designed to provide all the comfort of Latin American hammocks without wooden bars. They need to be curved to be comfortable diagonally. The double bolting of the tubes prevents them from banging against each other. The hammock is made in Colombia by a high-end manufacturer with whom we have been working since 1993! Machine washable up to 60° if necessary. This set is very durable as it withstood our test with 478 kg! See the photo. Caribe Twilight hammock size L with a width of 140. Creation by TRopical Influences.
Our Inka Relax support is specially designed to provide all the comfort of Latin American hammocks without wooden bars. They need to be curved to be comfortable diagonally. The double bolting of the tubes prevents them from banging against each other. The hammock is made in Colombia by a high-end manufacturer with whom we have been working since 1993! Machine washable up to 60° if necessary. This set is very durable as it withstood our test with 478 kg! See the photo. Caribe Twilight hammock size L with a width of 140. Creation by TRopical Influences.
It is important to wash your hammock in the machine at least once a year. Our advice: tie the arms together to prevent them from tangling and wash it in the machine at least once at the end of the season without using a dryer. Store it in a dry place with your household linen. This will prevent mold on the cotton and nibbling by small rodents.
The Inka Relax hammock stand is a metal model that supports a lot of weight (230 kg because it withstood our tests with 478 kg. We halve our maximum weight after testing). A classic that we have been selling for many years. Its height/length ratio is important for final comfort in the hammock.
Regarding maintenance, this stand is not made of stainless steel and is therefore not guaranteed against rust. We recommend that on your next visit to a large DIY store you get a 0.5L can of Hammerite paint "Hammered Slate Grey". Rust spots will begin to appear where the tubes are in contact or where there are bolts because the paint wears off in these places. Initially, you will apply small touch-ups on these oxidation spots. After a few years, the tubes become a bit dull with outdoor use. It will then be time to apply a full coat of paint.
Hammerite paint is incredibly resistant on metal (thanks to the blacksmith from Tarnos at La Yayi for his advice). Only one coat is needed and it can be used directly on rust. Note, if you store the can upside down, the layer that dries due to air will be at the bottom of the can. When you open it, even after 10 years, the liquid paint will be on the surface.
Data sheet